ACE HYDRAULIC DRIVEN CENTRIFUGAL PUMP - 200 SERIES 2" INLET X 1-1/2" DISCHARGE
Description
Recommended for Case-IH Type Load Sensing Closed Center Systems & Open Center Systems with capacities from 8-17 GPM.
Features
Back To Top-
- Pressure Compensating Closed Center Systems
- Load Sensing Closed Center Systems
- Open Center Systems up to 17 GPM (64.4 LPM) using internal needle valve bypass
- The Ace Internet Hydraulic Selection Guide is here to help in finding the proper hydraulic pump for your tractor.
Ideal for spraying, large tank agitation, liquid transfer, and spray - transfer combinations
The 210 motor requires 10 GPM (37.9 LPM) maximum hydraulic fluid input.
Recommended for:
Tech Specs
Back To TopBrand | Ace |
---|---|
Hydraulic Motor | 210 Motor Requires 10 GPM Hydraulic Flow |
Impeller | Valox |
Max Gallons Per Minute | 180 GPM |
Max PSI Rating | 80 PSI |
Pump Body | Cast Iron |
Pump Drive | Hydraulic Motor |
Pump Port Size | 2 Inch Inlet x 1-1/2 NPT Discharge |
Pump Seal Material | Viton Carbon / Ceramic Seal |
Pump Type | Centrifugal Pump |
Interchanges
Back To Top- 2336FMC200HYD210