PTO DRIVEN CENTRIFUGAL PUMP -150 SERIES 6 SPLINE QUICK DISCONNECT
Features
Back To Top-
The High Performance Pump. 100 PSI (6.9 BAR) at 40 GPM (151 LPM) due to increased pulley ratio and larger 1-1/2” x 1-1/4” construction
-
Provides higher pressure and greater volume for applications with large tanks and long spray booms
-
Allows fuel savings by operating at lower engine speeds while maintaining adequate spraying pressures
PTO belt driven centrifugal pumps were first introduced by Ace in 1964 and enabled the applicator to mount centrifugal pumps directly on 540 RPM and 1000 RPM tractor PTO shafts. The simple, yet durable design of the PTOC pump has withstood the test of time while many attempts at imitation have come and gone.
The key to success of the Ace belt driven pump has been the Spring Loaded Idler. The idler maintains proper belt tension which minimizes the load on the pump bearings. More importantly, the idler helps absorb the shock of PTO engagement that can destroy cog belts or gears.
Model PTOC belt driven pumps are easy to operate and maintain. Belts can be replaced in the field with minimum downtime and at little cost. Maintenance features also include sealed ball bearings and a readily replaceable mechanical seal. The belt guard provides complete coverage of the pulleys, shaft and belt. All PTO driven Roundup logo pumps are equipped with a stainless steel shaft and wear ring for excellent corrosion resistance.
Roundup® is a registered trademark of Monsanto Company.
Tech Specs
Back To TopBrand | Ace |
---|---|
Impeller | Valox |
Max Gallons Per Minute | 100 GPM |
Max PSI Rating | 110 PSI |
PTO Connection | 1-3/8 x 6 Spline - Quick Disconnect |
Pump Body | Cast Iron |
Pump Drive | PTO |
Pump Port Size | 1-1/2 Inlet x 1-1/4 NPT Discharge |
Pump Seal Material | Viton Carbon / Ceramic Seal |
Pump Type | Centrifugal Pump |
Interchanges
Back To Top- 014-PTOC150606SPQC
- PTOC1506006QC
- 48403
- PTOC150606SPQC