28 INCH X 8 MM NOTCHED WEAR TUFF CRIMP CENTER BLADE WITH 1-1/2 INCH SQUARE AXLE

Price Breaks

Features

Back To Top

    WEAR-TUFF Abrasion Resistant Coating

    The WEAR-TUFF process permits Lund to coat metal parts with a low cost, mass produced, smooth wear coating that is particularly effective at resisting abrasion. The material consists of alloy powders, carbides, and fluxes. By varying the amount of viscosity control agents,  WEAR-TUFF can be applied either as a slurry or sprayed on.  The coated parts are dried and then sintered in a controlled atmosphere furnace. This fuses the material to the substrate with a true metallic bond. If desired, the parts can then be heat treated to the desired mechanical properties.

    WEAR-TUFF can be applied at virtually any thickness. However, the optimal range for ground engaging applications is 0.025 to 0.040 in. Hardness typically is in the range of 60 to 65 Rockwell C.

    WEAR-TUFF can be applied to steel, iron or other metal substrates.

Tech Specs

Back To Top
Application Crimp Center Disc Blade
Axle Size 1-1/2 Inch Square
Brand Osmundson
Concavity Standard
Concavity Specification 4.25 Inch
Crimp Center Diameter 8 Inch
Diameter 28 Inch
Edge Notched
Hole Type Single Punch
Material Boron 15B26
Rockwell Hardness 46-52 Rockwell Scale
Thickness - Inch or Gauge 5/16 Inch
Thickness - MM 8.0 MM
Wear Tuff Coat Yes

Interchanges

Back To Top
  • BFC285605DF
  • BFC2856-05DF
  • 114-BFC285605DF
  • 2054BFC2856-05DF
  • 2053BFC2856-05DF